Plug the black lead into the jack and the red lead into the +V-Ω-A jack.
Before taking any measurement, ensure the needle sits exactly on "0" on the left side of the scale. If it doesn't, use a small flathead screwdriver to slowly turn the Mechanical Zero Adjust screw in the center of the meter face until it aligns. 2. Measuring Resistance (Ohms) This is the only mode that requires the internal battery. Plug the black lead into and the red lead into Set the dial to your desired Ω range. micronta multimeter 22 212 user manual
Touch the two probe tips together—the needle should swing to the right toward the "0" on the top green scale OHM ADJUST Plug the black lead into the jack and
If you cannot zero the "0 OHMS" scale, the internal AA battery is likely weak and needs replacement. Touch the two probe tips together—the needle should
However, owning a vintage multimeter comes with one significant challenge: Whether you inherited this meter from a relative, found it at a garage sale, or are a collector restoring classic gear, the Micronta Multimeter 22-212 User Manual is essential for safe and accurate operation.
Since finding an original paper manual can be tough, here is a breakdown of how to get this reliable tool back in action. Technical Specs at a Glance is a versatile analog multitester capable of measuring: DC Voltage : 0.1V up to 1000V. AC Voltage : 10V up to 1000V. DC Current : 50μA to 10A. Resistance : Up to 10MΩ. : Generally ±3% for DC and ±4% for AC. : Requires one 9V battery for resistance (ohms) measurements. Essential Operating Instructions 1. Zeroing the Meter
