Epson 1390 Resetter Upd

Only reset the counter after installing an external waste ink kit. If you reset without dealing with the physical waste ink, the pads will eventually overflow, damaging the printer internally and leaking ink everywhere.

Select "Particular Adjustment Mode" > "Waste ink pad counter." Check the "Main pad counter" boxes and click Initialize Turn your printer off and back on to finalize the reset. ⚠️ Critical Note: Resetting the software does epson 1390 resetter

Ever seen your printer lights flash frantically, only to find a message saying "A printer's ink pad is at the end of its service life"? Most users assume their machine is broken. In reality, your printer has an internal counter that tracks how much ink is sent to the waste ink pads during cleaning cycles. When this counter hits a pre-set limit, the printer locks itself to prevent a theoretical (and rare) ink spill. What is a Resetter? Only reset the counter after installing an external

: Run the AdjProg.exe or adjustment.bat file as an administrator. ⚠️ Critical Note: Resetting the software does Ever

: Backs up or restores the printer's mainboard settings.

Epson inkjet printers use porous pads to collect and contain excess ink during initial setup, borderless printing, and regular cleaning cycles. Over time, these pads become saturated. To prevent ink from leaking or damaging the internal components, the printer is programmed with an internal counter that stops the device once it estimates the pads are full. How to Use the Epson 1390 Resetter