: 1.8V (indicated by the "18" in the part number and "DC=E2H" code). Maximum Output Current : Typically 400mA to 500mA. Dropout Voltage : Very low, approximately 170mV to 200mV at 200mA load. Quiescent Current : Low power consumption, typically 30μA. Standby Current : Less than 1μA when in shutdown mode. Operating Temperature : -40°C to +85°C. STM32-base project Pin Configuration (SOT-23-5) The typical pinout for these LDO regulators includes: STM32-base project : Power supply input. : Ground connection. : Active-high enable pin.
Hidden in the footnotes of the datasheet is a temperature graph. For a DC E2H without a heat sink: dc e2h datasheet
Before you buy or install the E2H, look at the datasheet and ask: look at the datasheet and ask: