W1700k Openwrt Hot -

: VCC (3.3V) — Do NOT connect this if your adapter uses 5V, as it will damage the board.

The W1700K’s silicon is rated for up to 105°C junction temperature, but consistently running above 80°C degrades electrolytic capacitors and can cause Wi-Fi dropouts. w1700k openwrt hot

On the surface, it looks like a standard, plastic ISP router. But under the hood, it packs a punch that rivals routers costing two or three times as much. : VCC (3

: You must open the device to access the TTL serial console pins located at the bottom left of the board. Pin 1 : TX (Connect to RX of USB-to-TTL adapter). Pin 2 : GND. it looks like a standard