Wella — Climazon Millenium Manual Install
Use the approved WL04 wall bearing . It must be leveled perfectly to prevent the arm from "drifting" when in use. Attach the Acrobat 2004 Arm: Insert the extension arm into the wall bearing. Secure the spring arm (federarm) to the extension arm.
Ensure the main ON/OFF switch (8) is accessible and the plug (b) is correctly seated in the wall outlet. wella climazon millenium manual install
| Problem | Likely Cause | Solution | | :--- | :--- | :--- | | | Arm collar bolt too tight | Loosen Allen bolt by ¼ turn. | | Unit trips breaker | Short circuit in heating element | Test resistance across heating element (should be 10-15 ohms for 1500W). Replace if 0 ohms. | | No steam, just heat | Clogged ultrasonic disc or empty reservoir | Descale with vinegar solution. Check water level. | | Height slips down | Worn plastic compression ring | Order replacement clamp kit (Wella part # 72934). | | Burning smell | Dust burning off new element | Normal for first use after long storage. Run for 10 min in a ventilated room. | Use the approved WL04 wall bearing
