Surfmill 9.5 ((install)) -

Do not use a standard zig-zag raster. Use a with a stepover of 67% of the tool diameter. This leverages the wiper flats on the inserts. For a 25mm Surfmill 9.5: Stepover = 16.75mm, Feed = 3,000 mm/min.

Designed for both seasoned professionals and beginners, SurfMill 9.5 offers a user-friendly interface and intuitive operations. : It is fully compatible with Windows 11 . surfmill 9.5

💡 While earlier versions were primarily surface-focused, SurfMill 9.5 uses solid-based features to significantly reduce the difficulty of 5-axis programming. JDSoft SurfMill Do not use a standard zig-zag raster