... houses a lot of nice features such as Overload power cut, Standby power cut, remote controlled via mobile application... it is also made from high quality materials.” Hackaday.io
Remember the golden rules for the MTTL-W01: mttl-w01 manual
To avoid voiding your warranty or causing hazards, observe these warnings: The original manual usually lists the following behaviors:
The strip monitors instantaneous power usage and total electricity consumption, helping you identify energy-heavy appliances. 2. Technical Specifications Model Input Voltage AC 100-240V, 60Hz Rated Current 16A (Total) Maximum Load Connectivity Wi-Fi 2.4GHz (IEEE 802.11 b/g/n) Protection Overload, Overvoltage, and Overheat protection Material Flame-retardant ABS + PC Cable Length 1.0m to 1.5m (varies by regional variant) 3. Setup and Installation set automated countdown timers
The physical button on the MTTL-W01 is multifunctional. The original manual usually lists the following behaviors:
Open your app to toggle individual outlets, set automated countdown timers, or build scheduled routines for your lamps, chargers, and appliances. Voice Control:
Put your sensor/switch into pairing mode (usually by holding a reset button for 5 seconds until the light flashes). The gateway will scan and automatically link the device. 5. Troubleshooting Common Issues Gateway is "Offline"