Openipc Official

Solder or hold wires to the camera’s PCB pads: GND , TX , RX . Connect to your USB-UART adapter. Use screen or PuTTY at 115200 baud.

Visit the official OpenIPC GitHub and check the wiki for your model. Your privacy is worth the effort. openipc

He pushed the throttle, and the world below turned into a blur of 120Hz clarity. For the first time, the machine was finally, truly his. Solder or hold wires to the camera’s PCB

: Solder thin wires to these pads or use Pogo pins for a solderless connection. Connect to PC : TX on camera → RX on Adapter RX on camera → TX on Adapter GND on camera → GND on Adapter Visit the official OpenIPC GitHub and check the

Block your camera’s internet access at the router (no default gateway). Point your NVR to its local IP. No cloud, no accounts, no monthly fees.