Before taking measurements, you must calibrate your probes to ensure accuracy. Connect the Probe: Attach your probe to Channel 1 (CH1). Attach to Probe Comp:
Adjust the trigger level or change the trigger mode (e.g., to Edge trigger). PC Connection Fails: Verify that the correct drivers are installed from the Hanmatek Support Site and try a different USB cable. or more details on performing specific measurements Digital Storage Oscilloscope with 2 Channels 110mhz DOS1102 hanmatek dos1102 manual
. You can move two vertical or horizontal lines to measure the exact difference in time or voltage between two points on the waveform. Storage and Export: Before taking measurements, you must calibrate your probes