High sensitivity is recommended for small detection areas, while low sensitivity is better for avoiding traffic interference.
Secure the mounting bracket to the wall or ceiling. Tilt the bracket if the mounting surface is not parallel to the floor. prosecure opti combi manual english
The integrated LED provides instant feedback on the sensor's status: 🟢 Green: Standby mode (Operational). Infrared (AIR) safety curtain triggered. 🟡 Yellow: Radar (Motion) detection triggered. 🔵 Blue: Configuration mode or internal test phase. ⚪ Flashing Red: Fault detected / Error state. ⚙️ Configuration & Adjustment The unit is typically adjusted using internal DIP switches remote control 1. Motion Detection (Radar) You can adjust the radar field to be wide or narrow. Sensitivity: High sensitivity is recommended for small detection areas,
: Used for the "safety curtain" to detect stationary or slow-moving objects in the door's threshold. LED Indicators : Active infrared detection (safety area triggered). : Microwave detection (motion area triggered). Flashing Red/Green The integrated LED provides instant feedback on the
Printed from , all rights reserved. © Oxford University Press, 2026